antipanic

Anti-panic optics for optimal illumination of rooms and prevention of panic. Nearly square light distribution enables extremely simple lighting design.

Protection class I
Protection type IP40
Plug-in terminals for through-wiring, max. 2.5 mm²
Luminaire pre-wired using halogen-free leads
Polycarbonate lens
Optimum thermal management via heat sink
Strain relief at both ends (mains connection and cable to LED module)
LED emergency luminaire for emergency lighting in accordance with EN 1838, UNI EN 50172 and NFPA 101
Flat, discreet and elegant design
Ceiling recessed luminaire for 68 mm ceiling cutout and ceiling thicknesses of 1 - 25 mm
Trim of diecast aluminium, powder-coated white similar to RAL 9016; gearbox for installation in ceiling recess made of polypropylene (PP)
Tool-free rapid mounting of the luminaire via specially shaped spring clips
Tool-free battery replacement
2 high power LEDs, neutral white 4,000 K
Variants for escape route lighting: escape, escape HP, escape 90°, escape 90° HP Variants for anti-panic lighting: antipanic, antipanic HP Variants for building lighting: spot, spot HP
NFC interface for address-setting, configuration and maintenance via PROset Pen (article no.: 22170290) or PROset App
Non-maintained and maintained mode settable via jumper and NFC interface
Light level in mains operation settable from 15% to 100%
E1D, E3D and E8D: Luminaire with local battery supply for 1, 3 or 8 hour emergency lighting in maintained or non-maintained mode, with automatic test (auto-test) via the luminaire, optional central monitoring via DALI
Display of luminaire status via status LED
Installed loads: E1D = 4.7 W, HC E1D = 6.7 W, HP E1D = 8.2 W E3D = 4.7 W, HC E3D = 7.1 W, HP E3D = 8.2 W E8D = 5.5 W ECC = 3.8 W, HC ECC = 4.4 W, HP ECC = 7.2 W ECD = 3.9 W, HC ECD = 4.5 W, HP ECD = 7.2 W ECP = 3.8 W, HC ECP = 4.5 W, HP ECP = 7.5 W
E1D, E3D and E8D mains connection: 220-240 V AC, 50/60 Hz

Konfigurisanje Pribor

Izaberite proizvod

12 rezultata

Prijavite se da biste posebnu ponudu cena za vas i stanje zaliha

Još nemate nalog? Registrujte se i izaberite viši nivo pristupa da biste dobili ponudu individualnih cena i stanje zaliha.

Registracija

Proizvod	Luminous flux	Control	Colour	Correlated colour temperature	Dostupnost	Cena
Konfigurišite proizvod Pronađite savršeno rešenje za osvetljenje za vaš projekat u samo nekoliko koraka. Konfiguriši odmah
RESPRO MRCR ANT E3D WH. Broj artikla 42185644	208		Bela		Obično dostupno na stanju	Cena na zahtev
RESPRO MRCR ANT E1DP WH Broj artikla 42191079	235		Bela		Obično dostupno na stanju	Cena na zahtev
RESPRO MRCR ANT ECP WH Broj artikla 42185652	307	Powerline communication	Bela		Obično dostupno na stanju	Cena na zahtev
RESPRO MRCR ANT ECC WH Broj artikla 42185656	307		Bela		Izrada po porudžbiniDostupno za približno 15 radnih dana	Cena na zahtev
RESPRO MRCR ANT ECD WH Broj artikla 42185648	307	Dimming DALI	Bela		Obično dostupno na stanju	Cena na zahtev
RESPRO MRCR ANT ELPP WH Broj artikla 42934325	307	Powerline communication	Bela		Izrada po porudžbiniDostupno za približno 15 radnih dana	Cena na zahtev
RESPRO MRCR ANT HP E1D WH. Broj artikla 42185682	450		Bela		Obično dostupno na stanju	Cena na zahtev
RESPRO MRCR ANT HP E3D WH. Broj artikla 42185686	450		Bela		Obično dostupno na stanju	Cena na zahtev
RESPRO MRCR ANT HP ECD WH Broj artikla 42929766	519	Dimming DALI	Bela		Obično dostupno na stanju	Cena na zahtev
RESPRO MRCR ANT HP ECC WH Broj artikla 42929770	519		Bela		Izrada po porudžbiniDostupno za približno 15 radnih dana	Cena na zahtev
RESPRO MRCR ANT HP ECP WH Broj artikla 42929773	519	Powerline communication	Bela		Obično dostupno na stanju	Cena na zahtev
RESPRO MRCR ANT HP ELPP WH Broj artikla 42191508	560	Powerline communication	Bela	4000	Izrada po porudžbiniDostupno za približno 15 radnih dana	Cena na zahtev