TECTON II continuous row element RESCLITE PRO
RESPRO TEC2 ESC90 ECD WH
Broj artikla: 42191409
EAN broj: 8600850030992
Safety luminaire 3.9W 329lm
Luminous flux
329 lm
Control
Dimming DALI
Colour
Bela
Prijavite se da biste posebnu ponudu cena za vas i stanje zaliha
Još nemate nalog? Registrujte se i izaberite viši nivo pristupa da biste dobili ponudu individualnih cena i stanje zaliha.
Izrada po porudžbiniDostupno za približno 15 radnih dana
Tehnički podaci
Electrical Properties
Luminaire input power
3.9 W
Power factor
0.66
Standby Power
0.33 W
Rated voltage
220 - 240 V
Safety Class
SC2
Control
Dimming DALI
Emergency included
Da
Lum Data
Ne
Light Distribution
Light Source
LED
Luminous flux
329 lm
Luminaire efficacy
84 lm/W
Chromaticity tolerance (initial MacAdam)
5
Colour Rendering Index min.
70
Light Distribution
STD - standard
Total emergency luminous flux
329 lm
Beam angle
LED emergency luminaire for escape route lighting of two escape routes by means of 90° light distribution with min. 1 lux compliant to EN 1838
Physical Characteristics
Length
250 mm
Width
60 mm
Height
44 mm
Weight
0.3 kg
Colour
Bela
Impact strength
IK04
Degree of protection
IP20
Maintenance and Protection
Rated useful life (B10)
L95 100000 h 25 °C
Maintenance category CIE 97
D - Enclosed IP2X
Norme i standardi
Sertifikati








Za preuzimanje
TECTON II continuous row element RESCLITE PRO
42191409 RESPRO TEC2 ESC90 ECD WH
LED emergency luminaire for escape route lighting of two escape routes by means of 90° light distribution with min. 1 lux compliant to EN 1838; Room height 2.2 to 6 m; 2 high power LEDs, neutral white 4,000 K; lens made of polycarbonate; optimum thermal management via heat sink; luminaire with TECTON II adapter for simple and rapid installation of luminaire on the TECTON II continuous row system; roll-formed sheet steel with polyester paint finish; housing colour white (close to RAL9016); Luminaire for central emergency light supply, for single luminaire monitoring via DALI (DALI-2 certified), settable emergency light level; NFC interface for addressing, configuration and maintenance via PROset Pen (article no.: 22170290) or PROset app; addressing also alternatively possible visually or via EZ-addressing; Maintained mode: -40 °C to +40 °C, non-maintained mode: -40 °C to +45 °C; power supply: 220-240 V AC (+/- 10 %), 50-60 Hz; 176-280 V DC; (in maintained mode): Power in non-maintained mode: 0,3 W; Non-maintained and maintained mode settable via the central battery system; boost start function for faster orientation in emergencies thanks to higher illuminance levels at the start of emergency operation
; IP20; SC2; Luminaire wired with halogen-free and silicone-free leads; Impact strength: IK04; Dimensions: 250 x 60 x 44 mm; weight: 0.3 kg;
