Skip to main content

escape

RESPRO MRCR ESC90 E1DP WH
Broj artikla: 42191081
EAN broj: 8600850018976
Safety luminaire D85 4.7W 252lm
Luminous flux
252 lm
Colour
Bela
Pogledaj druge varijante
Prijavite se da biste posebnu ponudu cena za vas i stanje zaliha
Još nemate nalog? Registrujte se i izaberite viši nivo pristupa da biste dobili ponudu individualnih cena i stanje zaliha.
Izrada po porudžbiniDostupno za približno 15 radnih dana
Konfigurisanje

Tehnički podaci

Electrical Properties
EEC
D
Luminaire input power
4.7 W
Power factor
0.7
Standby Power
1.2 W
Rated voltage
220 - 240 V
Driver
Driver 1: 1 x EM powerLED NTx 102 DIM 5W ZUM
Safety Class
SC1
Emergency included
Da
Lum Data
Ne
Light Distribution
Light Source
LED
Luminous flux
252 lm
Luminaire efficacy
54 lm/W
Chromaticity tolerance (initial MacAdam)
5
Colour Rendering Index min.
70
Light Distribution
STD - standard
Total emergency luminous flux
252 lm
Beam angle
LED emergency luminaire for escape route lighting of two escape routes by means of 90° light distribution with min. 1 lux compliant to EN 1838
Physical Characteristics
Dimensions
Ø[85]x[44] mm
Mounting type
Ceiling recessed
Length
85 mm
Width
85 mm
Height
44 mm
Weight
0.45 kg
Colour
Bela
Impact strength
IK04
Degree of protection
IP40
Service life rating
1 h
Recessheight
39 mm
Maintenance and Protection
Rated useful life (B10)
L95 100000 h 25 °C
Maintenance category CIE 97
D - Enclosed IP2X
overviewFeatures_indoor
Luminous flux
252 lm
Luminaire efficacy
54 lm/W
Luminaire input power
4.7 W
Degree of protection
IP40
Mounting type
Ceiling recessed
Recessheight
39 mm
Norme i standardi
Sertifikati
CE
Electrical class I
IK04
Halogenfree
IP20_IP40
ENEC
Crteži
Light Distribution
Dimensional sketch

Za preuzimanje

escape

42191081 RESPRO MRCR ESC90 E1DP WH LED emergency luminaire for escape route lighting of two escape routes by means of 90° light distribution with min. 1 lux compliant to EN 1838; Room height 2.2 to 6 m; 2 high power LEDs, neutral white 4,000 K; lens made of polycarbonate; optimum thermal management via heat sink; recessed ceiling luminaire for 68 mm ceiling cut-out and ceilings of thickness 1-25 mm; tool-free rapid luminaire installation through specially shaped retaining springs; tool-free replacement of battery and control unit; Cover ring diecast aluminium, powder-coated; housing colour white (close to RAL9016); Polypropylene (PP) gearbox for installation in ceiling recess; Luminaire with local battery supply for 1 h emergency lighting in maintained or non-maintained mode, with automatic test (auto-test) via the luminaire, optional central monitoring via DALI, display of luminaire status via status LED; NFC interface for addressing, configuration and maintenance via PROset Pen (article no.: 22170290) or PROset app; addressing also alternatively possible visually or via EZ-addressing; Maintained and non-maintained mode: +5 °C to +45 °C; power supply: 220-240 V AC (+/- 10%), 50-60 Hz; (with battery fast-charging in maintained mode), typical connected load (without battery charging): 3.5 W in maintained mode / 1.1 W in non-maintained mode; Non-maintained and maintained mode settable via jumper and NFC interface; IP40; SC1; Luminaire wired with halogen-free and silicone-free leads. Suitable for installing in concrete casting surround (separately ordered); Plug-in terminals for through-wiring up to 2.5 mm²; Impact strength: IK04; Dimensions: Ø85 x 44 mm; weight: 0.45 kg; Long-lasting LFP (lithium iron phosphate battery) with a 5-year warranty. Valid in accordance with the terms of the manufacturer’s warranty, available at https://www.zumtobel.com/media/downloads/Garantiebedingungen_DE.pdf; Battery warranty invalid if installation takes place three (3) months after delivery EXW (Incoterms 2010)